1 / 2
SP36 diffuser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why Quick design for a diffuser for an SP36. Based on measurements from reddit's /r/flashlight, currently untested.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why
Quick design for a diffuser for an SP36. Based on measurements from reddit's /r/flashlight, currently untested.
Features
- Has a little ridge to stop the diffuser from sliding too far
- Top has an inward spike that (hopefully) distributes light in a donut-shape around the light when tailstanding
- Designed for 49.2mm fit - scale up or down if it doesn't fit right.
Instructions
- Should be printable without supports when printed with the flat part on the bed.
- Use a .4mm nozzle (walls are 1.22mm thick)
Open Source
As always the original design file is included, so feel free to improve it (or learn from it)!
Category: Gadgets