Motorcycle gyroscopic cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gyroscopic cup holder that works with purchased double clamps and holds soda cans/water bottles.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the original design. However, the bracket broke as I was tightening it. Therefore, I decided to buy a double clamp from Amazon, and modified the outer ring to fit it better.
Additionally, I carry soda cans sometimes. Initially, I made an insert to install inside the inner ring. However, the inner diameter would be even smaller than the original ring, and thus many cups won't fit in properly. Therefore, I redesigned the inner ring completely. A filament change near the top is recommended to add some decorations.
TL;NR: Print the middle ring and spacers from the original model, print the outter and inner ring here, and buy a double clamp from Amazon.