1 / 7
Simulated 2000 Watt Linear Amplifier | Ham Radio
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses four simulated 500 Watt RF Transmitting Tubes, with simulated antique panel meters and a rotary encoder
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simulation of a 2000 Watt Ham Radio Linear Amplifier for use on the shortwave bands.
The base is printed in Transparent PETG. The various copper pieces are printed in Copper Silk PLA. The central tube is glued in place with super glue. The tubes and mounts are sitting in place held by the simulated copper bolts.
The bottoms were cut out of the spiral vase tubes, and a mirror placed in the bottom of the device to reflect the LEDs back upward.
Uses these other models
- https://www.printables.com/model/1363736-vacuum-tube-simulation-500w-rf-power-amplifier-tub
- https://www.printables.com/model/1369313-simulated-antique-panel-meter
- https://www.printables.com/model/1259297-encoder-knobs-for-arduino-keyed-and-spring-tuning