Top mounted filament guide for Wanhao i3/Maker Select
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why? When the filament is mounted on the control box (which is safer and more stable than mounting it on top of the Z…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why?
When the filament is mounted on the control box (which is safer and more stable than mounting it on top of the Z bridge) the filament grinds against the frame and can cause under-extrusion.
This filament guide is optimized for use with the spool on the control box.
Features
- Mounts using existing holes on the Wanhao i3 V2.1 and probably all recent Maker Select models
- The filament hole is beveled outwards to provide a smooth path from all directions
Open source
The original design (fusion360) is included, so feel free to improve it.
Requirements
Requires 2x M5 bolts with a threaded length of at least 10mm.
Longer is possible, but be wary of your Z-clearance!
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Notes:
Printed in PETG, but PLA should work equally well.
Category: 3D Printer Accessories