BMW R1200RT Oilhead windscreen arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2005-2013 Oil-cooled BMW R1200RT have a tendency to break a winshield arm due to metal fatigue in aluminum alloy upper…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
2005-2013 Oil-cooled BMW R1200RT have a tendency to break a winshield arm due to metal fatigue in aluminum alloy upper windshield arms. This is a replacement one.
Manufacturer PN 46637686677 and 46637686678
Inspired by blueprint by RASAMAHA on https://bmwclubmoto.ru/threads/15172/ Sadly, original models were unavailable so i decided to remake the model.
Of course, a metal one would be preferrable, but plastic one at least functions.
Maybe it's better to print it from CF-ABS or CF-PETG, in my experience plain PETG is working so far.
Depending on your printer's settings and tolerances, a 8mm and 10mm drill bits might be needed to cleanup the interior of axle holes - axles should be snug fit, but not binding.
Transfer bushings from upper part of your old arm to this one.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2 mm layer
Infill:
100%
Notes:
Use of skirt advised
Category: Automotive