Hellforged Horned Skull for bike cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hellforged Horned Skull for bike cap
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Unleash a little hell on your ride with this Demonic Skull Bike Valve Cap! Designed to add a touch of fierce personality to your bike, this cap is a quick and easy print that makes a big impact.
Printing Instructions
This model is designed to be very simple to print. For best results, follow these recommendations:
Supports: Tree(Auto) Threshold angle 30
Layer Height: 0.16mm for good detail, but 0.2mm works fine too.
Infill: 15-20% is plenty.
Recommended: PETG, ASA, or ABS for better durability and temperature resistance.
Works fine: PLA also works perfectly well, especially for a test print.
I used Orcaslicer
Compatibility
This cap is designed to fit a standard Schrader valve, which is the most common type found on mountain bikes, cruisers, and cars.
I hope you enjoy this design! If you print one, please post a Make I'd love to see how it turns out on your bike!