Inspur Intel X540-T2 4010 blower fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4010 fan mount i created for the Inspur Intel X540-T2 10 GBe network NIC.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable.
Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard.
It is mounted to the card using a M4 8mm screw through the PCB.
The fan snaps into place, and can optionally be secured to the 3d printed bracket using 3x M2 8mm screws before sliding onto the card.
The goal was to have something more low profile. The top of the fan, is roughly ~1 mm above the heatsink. It is below the height of the PCI-E bracket.
Printed with supports.