Minimalistic Pi Camera mount for Prusa XL - now posable!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using a Raspberry Pi and a long camera cable, create a webcam for your Prusa XL.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on (not a remix) instructions for the software by Randy Obillos, I got myself a RasPi v1.3 camera working on a RasPi 4B;
Please be aware; this is not usable with the enclosure kit. When I got it built and mounted, I will create a new solution (unless I find one on Printables)
Summary and changes;
- Install Raspbian to an SD card, for convenience prepare your WiFi credentials and SSH key, all using the RasPi Imager software, though not clearly stated and obvious, a helpful reminder :)
- Instructions by Randy are excellent, but I needed to change the following to get the older camera to work;
ConditionPathExists=/sys/bus/i2c/drivers/imx219/10-0010/video4linuxbecomesConditionPathExists=/sys/bus/i2c/drivers/ov5647/10-0036/video4linux--camera-path=/base/soc/i2c0mux/i2c@1/imx219@10becomes--camera-path=/base/soc/i2c0mux/i2c@1/ov5647@36
Based on my own static position model, but not happy with the camera angles, and not having the energy or drive to keep rebuilding the model in FreeCAD (because everything breaks when a change “up high” is needed), I decided to make it with hinges.
Hardware needed;
- 6x M2 nut, 4 for the camera and 2 for the horizontal hinge (double nut; one nut for tension, second nut to prevent unscrewing)
- 1x M2x6 bolt (M2x5 might be o.k. too)
- 4x M2x8 bolt (but could probably get away with x6)
Printing instructions;
After loading the model in your slicer, split into models, and position to your liking.
You can print the base and the first hinged part without supports, but the camera plate needs support any way you print is. When I find a better way, I will update here. (I am considering making everything 6mm thick so the horizontal hinge can be inside the camera plate)