KSUN M6 Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt clip for KSUN M6 (fixes issues with volume knob)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Standard Digital File License
The KSUN M6 is a great little PMR/FRS/GMRS/Ham walkie-talkie that can be used for short range UHF communications between 400-480Mhz with 0.5w on low power and 2w on high. If you want a full review, watch the video below, however, the main issue with the radio is that the volume knob gets turned too easily (up or down) while on your belt and the included belt clip didn't fit my belt (1.5" nylon). I have rectified the issue and also provided several options for securing to belts or PALS/Molle webbing. Printed in PLA with no infill. Recommended printing orientations depicted in images section.
Suggested donation is a coffee ($3-5). For a $10+ donation I will emboss a name or callsign on front face of clip body and send you the file.
If you want to buy a pair of KSUN M6s click here, and here for the programming cable.