Hero Me Gen 5 mount for mirrored BMG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had originally modified the remixed mount by just chopping off the cable chain mount, but I noticed it flexing…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had originally modified the remixed mount by just chopping off the cable chain mount, but I noticed it flexing during retractions. After a few tries I was able to get it to be strong enough, and not too heavy.Adding a support behind the filament path as well as a gusset off to the side.
The BMG mounts included in the original package, do not work with the mirrored BMG extruder. The alignment is completely wrong for the filament path.
This works great with my micro-swiss hot end but should also fit the E3D style as well.
Printed at 50% infill with 4 walls.
Tree supports as needed for the rear overhang.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
50
Filament: Fiberlogy Easy PLA PLA Red
Category: 3D Printer Parts