btt tft35e3 ender 3 mount with port access
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had previously printed the AIO case linked when I built my Ender Extender, but it uses the original Ender display…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had previously printed the AIO case linked when I built my Ender Extender, but it uses the original Ender display mount. This does not allow access to the ports on the side of the TFT. After some playing around I have the mixed pieces angled just about right. This could be improved, but my CAD skills are lacking still.
Marking this as WIP, will come back and try again.
Fastest print is in on its face, the supports will leave some marks, but can be cleaned up in post. Printing on the side, the supports will be internal to support bridging, but does take longer, and leaves the cleanest external finish.
Print Settings
Printer:
Ender Extender 300
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15
Filament:
Sunlu PLA
Black
Category: 3D Printer Parts