Rotunda-Drilled Truncated Icosidodecahedron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Numberphile video linked below. Shape originally from "Adventures Among the Toroids" by B.M. Stewart
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution
https://www.youtube.com/watch?v=BhSlqIe1CRQ&t=890s
I printed this on a Prusa Core One:
0.1 mm layer height
Rested on the dodecagonal edge against build plate with supports enabled
This caused many of the rotunda squares to print in a horizontal plane, either fully supported (5) or as top surfaces (5). In hindsight, it might be better to rest the model on one of the exterior squares, which would have rotundas facing horizontally and all surfaces would be sloped, except the very top and bottom of the model.
As modeled, the polygons have 12.5 mm edges, and the diameter is 95 mm. Scale as you see fit.