Voron Afterburner ADXL Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated to v1.1 Magnetic ADXL accelerometer mount for the stock Voron Afterburner. Neodymium magnets are positioned to…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Updated to v1.1
Magnetic ADXL accelerometer mount for the stock Voron Afterburner.
Neodymium magnets are positioned to match the front Afterburner screws.
Obviously the Afterburner screws need to be a ferrous type metal for this to work so if you have stainless steel screws you'll need to swap them out.
The mount is stable and does not release when testing.
My testing found that even mounting the ADXL with screws the results were different, and testing using the magnet mount the results had a negligible difference from the results of that when screwed.
BOM
4/ 6x2mm neodymium magnets
2/ M2.6 SHCS self taping screws
Can be printed in any filament material.
Category: 3D Printer Accessories