1 / 5
Glue stick holder clamp for the 27mm wide/25 gram size with M3 countersunk screw hole — zdjęcie 1
1 / 5

Glue stick holder clamp for the 27mm wide/25 gram size with M3 countersunk screw hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds a 27mm diameter / 25 gram glue stick to any point using a counter sunk screw.

Ocena
0 / 5
Polubienia
5
Pobrania
29
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holds a 27mm diameter / 25 gram glue stick to any point using a counter sunk screw. Use M3 screw with T Nut to mount to printer, or use counter sunk wood screws.

Recommended print material: PETG

Print settings: 3 perimeter walls, 4 bottom layers, 4 top layers, 15% Archimedean Chords infill.

Tagi