Ender3 & 3v2 Filament Sensor Holder for MicroSwiss DD Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DEPRECATED DESIGN Upadte 26/05/2021. I have not been using this as it broke for me. I now just have the switch…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
DEPRECATED DESIGN
Upadte 26/05/2021.
I have not been using this as it broke for me. I now just have the switch floating lose over the MS filament inlet to the extruder. Works just as good. KIS!
.
Had to find a way to holder the filament sensor as I was not happy with it just floating around above the extruder so I come up with this what I think is a simple design. Easy to install. 1x M3 face bolt and 1x M3 side bolt for the vice type clamp (work in progress).
The sensor is mounted so the filament is a straight shot into the extruder. Photo shows it mounted without the PTFE tube installed.
I printed it out in PLA+ but might be better with a more tempature suitable filament like PETG or ABS as it mounted to and over the stepper motor that warms up.
You'll need...
2/ M3x12mm button head hex socket bolts
1/ M3x5mm brass insert.
Works for me.
Please donate to help out!
Category: 3D Printing