Exhaust Pipe Prusapovič
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A perfect accessory to turn your kid's bike into a true motorcycle.
- Ocena
- 5 / 5
- Polubienia
- 104
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 2576
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Remember sticking a piece of cardboard or a plastic bottle in your bike’s wheel to make it sound like a motorcycle? Now, Prusa and Akrapovič have teamed up to bring that childhood dream to life—with the ultimate bike accessory for your kid. Just mount this mini exhaust pipe onto the seat stays, and give your child the bike you always wished you had!
To make it work you will need the following parts:
| Part name | Quantity | Inflill parameter |
| Mounting plate bolts side | 1 | 50% |
| Mounting plate nuts side | 1 | 50% |
| Reinforcement plate | 1 | 50% or laser cutted |
| Muffler entrance | 1 | 30% |
| Muffler | 1 | 15% |
| Muffler exit | 1 | 15% |
| Card fastener | 1 | 50% |
| Card | 1 | 100% |
| Card2 (optional) | 1 | 100% |
You will also need:
5x Bolt M4x35mm
2x Bolt M4x10mm
7x Nuts M4
1x Cyanoacrylic glue
1x silver spray paint (optional)
If you don't have an MMU, like me, you can spray paint muffler entrance and muffler exit.
I used blue tape to protect the black spots.
Once it is done, glue the muffler, muffler entrance and muffler exit together.
Then, attach the muffler and the reinforcement plate using 2 bolts M4x10 and 2 nuts.
Put 5 nuts in the mounting plate nuts side.
Take your assembled muffler and 2x bolts M4x35.
Slide the exhaust pipe of the muffler between the two mounting plates.
Then screw the 2 bolts. Keep them lose, you will tighten them latter on the bike.
Once it is done, you can slide the mounting plates on the left chainstay of your bike.
Use 2 more bolts to tighten the mounting plates to your bike.
Screw all the bolts tightly. If it still moves, add the last bolt at the center of the mounting plate.
Finally, slide the card in the muffler through the wheel and secure it with the card fastener.
Now it is time to ride! So grab your bike and go outside!
Futur features:
Add RGB light in the exhaust pipe to look like a flame. And make it usefull for rear light by night.