Whiteboard Checklist Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jig to easily draw checklist boxes and lines on a whiteboard
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I use checklists every day to stay on track. It's pretty obvious when I write up my checklist on my whiteboard, however, that I'm really bad at drawing straight lines and squares by hand. 3D printing to the rescue again, I suppose!
This jig sits at the corner or side of a whiteboard and includes a raised grip to hold it while you're tracing checkboxes and list lines through it. It's sized to print on a Bambu X1C, but can be scaled or chopped to suit your particular needs. No supports are needed.
I hope this helps you as much as it did me!