Klein bottle with base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Print and make a math nerd happy!
A Klein bottle, with a base for easier 3d printing
At full scale it is approx 100mm high and 70mm in diameter at its widest. The wall thickness is 1mm
As in "Open source" I try to share my source files, so there is the Solidworks 2012 file as well.
The normal size is approx. 100mm high and has a wall thickness of 1mm. There is also a model with half thickness and a thinner base (to print at 150% size and above without spending 5 days to print). So you shouldn't need to use supports in your slicer. There are models with a base for easier printing and others with added integrated support for the underside of the loop (a thin membrane that you cut after printing). You will also find my SolidWorks 2017 source files (Quick and dirty + SW is not very happy with self-intersecting surfaces, I had to use a few tricks...) The latest and best models are named "EasyPrint" and print just fine without support. They also include a thicker "ceiling" in the top of the loop to avoid holes when printing. The teardrop hole makes it easier to start removing the support membrane with a knife.
Category: Math Art