Enclosure for Sonoff ZBMINI / MINIR4 with M3 Heat Insert Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable enclosure for Sonoff ZBMINI & MINIR4 with secure M3 heat insert mounting.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Commercial Use
This 3D printable enclosure was designed to securely house the following Sonoff modules:
Sonoff ZBMINIR2
Sonoff ZBMINIL2
Sonoff MINIR4
Sonoff MINIR4M
The design provides a compact, organized, and professional solution for installing Sonoff smart relay modules while maintaining structural strength and serviceability.
The enclosure uses M3 heat-set inserts, ensuring durable threads that withstand multiple openings without degrading the plastic.
🔩 Required Hardware
4x M3x10mm screws
4x M3 heat-set inserts (6mm length x 4.5mm outer diameter)
4x Wood screws 3x32mm
🖨 Parts to Print
1x Main enclosure body
1x Cover lid
2x Cable retention plates
🧵 Important Note
All wiring should be properly terminated and fully accommodated inside the Sonoff module itself.
The enclosure is designed to organize and protect the module — not to store excess external wiring.
🧱 Recommended Material
Print all parts using PLA.
Suggested print settings:
Layer height: 0.2mm
Infill: 20–30%
3 perimeters
Supports typically not required (verify orientation)