Microscope stand extension arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends the reach of a stand for a digital microscope of approximate diameter 34mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Inspired by https://makerworld.com/en/models/589181 I like to believe my version has a little more style and function to it.
The holding ring has a hole for an M3 threaded insert but this hole is blind, ending in a flexure which should protect the microscope from the M3 bolt which needs to be inserted through the knob.
I set the insert by folding a thin strip of paper in half lengthways and inserting it into the slot at the bottom of the hole. This prevents the insert from melting its way through the thin wall of the flexure.
I printed in PETG for the additional robustness but it might work in PLA.