Wahl Clipper Guides 12 and 16 (1.5 inch/37mm and 2 inch/50mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,33 € – 2,85 € netto (bez VAT)
Dla pliku: wahl150_0.26mm_PETG_MK3S_2h13m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,59 € netto (środek widełek).
- Masa podana przez autora
- 43 g
- Czas druku podany przez autora
- 2,22 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm)…
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 1554
- Wydruki
- 1
- Wyświetlenia
- 5087
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes.
Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades.
They are intended to be used with the clipper horizontally, on the side parallel to the cutting head plates, but when used with the clippers vertically, the hair length will still be maintained.
The orientation for printing should be as shown above in the .stl files to print properly with minimal support required.
I have also included the gcode for using PETg on a Prusa MK3S, in case that is what you are using.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PETg
Notes:
I used .26 layers and the .3 fast draft speeds. You need some support under the the tip of the latch. Some slicers, including PrusaSlicer, will do that automatically if you set it that way in supports. In my case, I painted in where I wanted the support with PrusaSlicer 2.3. I set the offset for the supports to .1mm. 4mm nozzle. 85-90C bed, 235-240 nozzle.
I used [Polymaker](https://www.amazon.com/PolyLite-Printer-Filament-PLA-2-2lb/dp/B01IAVQIWE?dchild=1&keywords=polymaker+filament&qid=1618268031&sr=8-3&linkCode=ll1&tag=thingiverse09-20&linkId=4324f80ce0a8d9e2bed8c93f7135c03f&language=en_US&ref_=as_li_ss_tl) PETg 1.75.
A little cleanup may be required on the radius touching the print bed to smooth it out.
I had originally included all the size stamped into the surface, but it just slows the print down. The two are noticeably different form the #8 guide that you should be able to tell what the sizes are just by looking a them. I do not consider #10 or #14, 1.25"/32mm or 1.75"/44mm, useful, so don't bother asking.
Category: Household