OctoFallopio (suite)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a suite of files. The first two, Octofallopio1 and OctoFallopio-NoTop, are single wall vase mode, corkscrew,…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is a suite of files. The first two, Octofallopio1 and OctoFallopio-NoTop, are single wall vase mode, corkscrew, designs. The two files are ~152mm tall, but of course you can scale or slice them to make a bowl, for instance.
However, setting everything up for vase mode and then changing the vertical walls to two layers will yield a more water tight vessel. Remember to leave the top layer at zero.
The other two files are heavier walled designs not intended for vase mode, corkscrew, setup. I used 10% fill on these two. They are water tight and heavy. They also take much longer to print. About 3 hours for ~100mm tall. If you are patient, scale larger.
I used Prusament .2mm layers on all versions.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
none and 10%
Filament: Prusament PLA
Category: Sculptures