1 / 4
Quadrazquina Remix Round Corners
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is intended for corkscrew, single wall printing. I used Prusament PLA. .2mm layers. Use 5 or 6 bottom…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This design is intended for corkscrew, single wall printing.
I used Prusament PLA. .2mm layers. Use 5 or 6 bottom layers, zero top layers.
Use ballast for stability; marbles, small river rock.
You can also use 2 walls thick. 5 or 6 bottom layers, no top layers, no fill, for a sturdier and more water tight piece.
Re-mixed from my design: https://www.thingiverse.com/thing:3365399
by request from users.
Category: Sculptures