YETI Drying Stand/Rack for 26oz Rambler (No AMS/MMS req'd)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drying stand / drying rack for YETI 26oz Rambler and screw top
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a way to dry my YETI Rambler at work and home without leaving it open to collect dust. I designed this drying stand and top hook attachment. I didn't need any supports but you might consider a brim for the point where the hook touches the plate depending on the “stickiness” of your print bed.
Included are a version with YETI debossed into the base and a blank version. If you swap filaments at 2.8mm or have an MMS/AMS you can have it pop with a different color. I recommend a deeper deboss if you're going to make your own version and use a filament swap vs AMS.