DodecaVase Suite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another set of vases that must be printed in "vase", "corkscrew", single wall mode. Use 2 or 3 bottom layers…
- Ocena
- 2,5 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 207
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is another set of vases that must be printed in "vase", "corkscrew", single wall mode.
Use 2 or 3 bottom layers and zero top layers.
The files here are relatively short and may not print unless scaled larger. The stl files are about 75mm and should be scaled to 120mm-150mm.
Here is one of the designs being printed scaled to 120mm height: https://youtu.be/l694WMigZ9Q
Note that if you stop printing at 150-160 layers, you will get a nice bowl or dish. 50-70mm of a 120mm scaled print. With some slicers, you can set it to quit printing at a certain height, otherwise, just pause and stop manually where you want the dish to end.
Category: Sculptures