Early Solid State Bally / Stern Score Display Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace that lost or damage score display tray in your early Bally or Stern solid state pin!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bally / Stern early solid state pinball score display tray. Great option to customize colors during pin restoration. Printing with supports recommended - takes about 2.5hrs on my X1C to print a tray of three with supports. Add some new self-adhesive rubber feet to mitigate the score display PCB bowing when applying pressure putting on the wire harness connector.
CAUTION - POTENTIAL FIRE HAZARD IF USED INCORRECTLY
I made these as a customization mod for my 1981 Bally Flash Gordon restoration to hold new LED score displays. I would NOT recommend using these 3D printed display trays if you're using your pin's original high voltage gas-driven score displays. OEM score displays, at around 180v, can run hot and you don't want plastic parts anywhere near that display's PCB connector. Replacement LED score displays, like the XPINs I'm putting in my Flash Gordon, run on 5V and will not be a heat risk with these 3D printed score display trays.