Adapters for balancing self-tightening 6mm DJI Phantom type blades V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ADDED GROUPS OF 4: 4 OF EACH AND 2 OF EACH FOR EASIER PRINTING This is an updated design for the DJI Phantom 6mm self…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
ADDED GROUPS OF 4: 4 OF EACH AND 2 OF EACH FOR EASIER PRINTING
This is an updated design for the DJI Phantom 6mm self locking blades. Old version: http://www.thingiverse.com/thing:516376
This one is a little larger and has a larger base to prevent separation from the bed during printing. The flange that makes it more stable for printing also is easier to hold and screw into the prop.
I printed this with a .5mm nozzle, .100mm layers, ABS, fan at 75% after the fourth layer. I duplicated the model 3 times and used a 10mm brim to make the parts more stable while printing. The black is end CCW, white is CW. The shaft is 3mm polished tool steel. In order to get these to work properly, I used M6 X 1.0 dies, LH and RH to clean up the threads.
Category: R/C Vehicles