1 / 4
Kong Holder with Plug and enlarged
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for single Kong with plug at the bottom for easy filling. Remix of 1X Kong Holder by bobby.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the awesoe 1X Kong Holder by bobby. I enlarged the original holder slightly as I found it difficult to insert and especially to remove the Kong. More importantly, there is a plug at the bottom that seals the small hole through which my Yogurt keeps leaking.
For those interested in replicating, the plug is 7 mm in diameter and 3 mm tall (starting from the surface of the base plate).
Printer and settings:
- Creality Ender 3 (heavily modified)
- Prusa Slicer 2.9.2, 0.2 mm layer height, 15% lightning infill, no support
- Generic PLA (not the best choice obviously but it works when handled appropriately)