1 / 2
Voron 1.5 Fan Duct for 5020 Blower Fan — zdjęcie 1
1 / 2

Voron 1.5 Fan Duct for 5020 Blower Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a fan duct for use with a 5020 (50x50x20mm) blower fan, on a VORON 1.5 printer. To be used with the bracket…

Ocena
0 / 5
Polubienia
18
Pobrania
118
Wydruki
0
Wyświetlenia
875
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a fan duct for use with a 5020 (50x50x20mm) blower fan, on a VORON 1.5 printer.

To be used with the bracket from SIERRA086. https://www.thingiverse.com/thing:2044610

The model is fully reworked using Fusion 360's "Loft" and "Shell" features, making the finished model much smoother than the original one by SIERRA086.

Tested on a Sunon MagLev GB1205PKV3 fan.

Upgrade yours to 5020 for quieter printing without losing cooling performance. With a 5015 4500rpm fan I have to use 80% speed for PLA printing. With a 5020 4500rpm fan, I only have to use 50%, making it much quieter.

Make sure to print it with a brim, because the bed contact area is small.

Category: 3D Printer Parts

Tagi