1 / 1
1993-1998 Grand Cherokee ZJ Hood Screw Adjuster Bumper — zdjęcie 1

1993-1998 Grand Cherokee ZJ Hood Screw Adjuster Bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This may also work for the XJ Cherokee and WJ Grand Cherokee.

Ocena
0 / 5
Polubienia
6
Pobrania
34
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Use a high temperature, possibly flexable filament. I used YXPolyer PA6 (no fibers).

I suppose you could try a fairly stiff TPU, and could also try ASA/ABS, but I'm not sure how they'd hold up to the heat. 

See below for support sections. 

Support type: Snug

Avoid the supports in the threads. The overhangs on the threads might look a little crappy, but it doesn't impact the performance of the part (and sometimes helps it a bit, as the stock ones tend to spin on their own.)

Tagi