1 / 1
Business cards plate for xTool F2 Ultra — zdjęcie 1

Business cards plate for xTool F2 Ultra

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A business card plate for the xTool F2 Ultra, designed to hold six aluminum business cards at once for engraving.

Ocena
5 / 5
Polubienia
29
Pobrania
354
Wydruki
1
Wyświetlenia
722
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

A simple plate model designed to hold six aluminum business cards for engraving.
The cards are intentionally offset from the plate’s horizontal center, allowing the use of autofocus during engraving.

Initially, I encountered issues with plate warping, which prevented it from laying flat on the table. To solve this, I switched to a more minimal design, making the plate thinner. I’ve found the best results when printing with PLA Matte or PLA Basic (on H2D), as these materials are easier to slightly bend and flatten.

Both the FreeCAD file and XCS template are included.

Tagi