AprilTag Tracker Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable base for ju1ce's AprilTag VR FullBody Trackers!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 288
- Wydruki
- 0
- Wyświetlenia
- 1915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
https://github.com/ju1ce/April-Tag-VR-FullBody-Tracker/
A simple to print base to put your tags on. Designed for US Letter size paper, scale to about ~105% for A4.
You can use two and wrap them in one strap to create a 360 degree tracker, as shown in the 2nd image.
Print at a tall layer height to save time and allow the adhesive to have a coarser surface to bond with, sanding with a low-grit sandpaper may also help if your tags tend to peel off.
May Update:
New version 2.0 tracker base!
Features more efficient design to save material, while attempting to preserve adhesion to the printed tags. Two small rings further prevent bending of the tag when using a more ductile material such as PETG. Saves ~15g of material (dependent on print settings).
