Climbing carabiner anti-crossload preventer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Device to prevent climbing carabiners from crossloading during unattended use, similar to the avant climbing flex…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Device to prevent climbing carabiners from crossloading during unattended use, similar to the avant climbing flex link. Must be printed in TPU
https://hownot2.com/products/flex-link
legal disclaimer: Climbing is an inherently dangerous activity. This is an experimental, non-certified design provided for informational purposes only. By printing or using this design, you accept full and sole responsibility for your safety and all associated risks.
NOT CERTIFIED EQUIPMENT: This is not a rated piece of life-support equipment. Do not trust it as you would professionally manufactured and certified gear. 3D PRINTING RISKS: Print quality, material choice, and UV exposure drastically affect strength. Sudden, unexpected failure of 3D-printed parts is always possible. YOUR RESPONSIBILITY: You are solely responsible for thoroughly testing this part in a safe setting and inspecting it for any signs of wear, cracking, or damage before every use. DISCARD IF DAMAGED: If you have any doubt about the part’s integrity, destroy and discard it immediately. This design is provided "AS IS" without any warranty. The designer shall not be held liable for any damages or injuries resulting from its use.
If you do not fully accept these terms and risks, do not print or use this design.
Category: Sport & Outdoors