1 / 2
Owalla 40oz Cup Holder Adapter for Chevy Tahoe — zdjęcie 1
1 / 2

Owalla 40oz Cup Holder Adapter for Chevy Tahoe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter that will allow a 40oz Owalla water bottle to be used in a standard cup holder for the 2024/25 Tahoe.

Ocena
0 / 5
Polubienia
16
Pobrania
85
Wydruki
0
Wyświetlenia
454
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I love my Owalla 40oz water bottle but the cupholders in my Chevy Tahoe definitely won't fit it, so I made an adapter that will fit into the existing cup holder. Should work with a 2024 and 2025 Chevy Tahoe (Mine is a 2024). I included the step files as well if you need to modify it to your vehicle.

I recommend using PETG or a filament that can withstand the high heats inside a vehicle. PLA will end up warping.

If I made another one, I may reduce the top height by 10-20mm and/or add some slots on the side to save on filament. If I get around to making another I will upload.

Recommended Print Settings

  • Material: PETG
  • Infill: 10%
  • Layer height: 0.2 mm
  • I did use supports for the outer lip

Tagi