Gimbal head for Tamron 150-600 G2 two-axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my second version: What has changed: Much thinner, but as rigid if not more thanks to PET Second axis: also…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is my second version:
What has changed:
- Much thinner, but as rigid if not more thanks to PET
- Second axis: also panorama with 2 bearings: a 625 for centering and a rolling plane for transmitting forces. There are still 4x 625 bearing for the tilt axis.
- two way of fixation of the zoom: either sliding with two M3 screw for security (can be equilibrated at any zoom position) or the classical 1/4" screw, equilibrated at 600mm only.
- Level in the center for proper mount on the tripod
- Possibility to brake the movement with 2 screws per axis.
- the Manfrotto quick-release mount can easily be replaced by other connector for different tripods or other situations (using M3 screws)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Filament:
Filamentum PET
Black
Notes:
Support only on bed.
Small parts were printed at 0.1mm resolution.
You will need:
2x foot
1x stator
1x rotor
1x bearing_lower
4x bearing_upper
4x half_spacer
Post-Printing
Panoramic motion
1x ball bearing 625
1x Needle roller thrust bearings - AXK 3552
6x M2.5x16 for holding the lower 625 and the manfrotto quick-release plate
M5 screw and hex-nut for the bearing.
32x7mm 2d bubble level
Tilt motion
4x 625 bearing
12 M2.5x12 screws + square nuts
2x M5x25 screw + hex-nut
Glue two half_spacer together between each pair of half spacer.
Mount feet on stator:
2x M3x40
4x M3x20
+6 square nuts
Brake for motion
M3 screw with hegagonal head + square nuts (to be glued)
Category: Camera