XARILK GEN 3 Knife Sharpener Stone Storage Bin and Rod Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XARILK GEN 3 Knife Sharpener Stone Storage and Rod Stopper
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- GNU Lesser General Public License
I made this to hold the included stones and to hold the allen wrench. I printed with PET-CF17, with default 15% infill, etc. I made it so it would work if you had screws mouting the platform or no screws. I only use this occasionally and only pull it out when needed. So I decided not to mount it to anything. So, I made pegs to secure the storage tray in the back holes instead. The 6mm rod holders hold the rod better when in storage. Also could be used as for min / max stroke. They are currently 3mmx20mm hexnut screws, but I also ordered 3mmx20mm thumbscrews with shoulder grip, to hopefully not need an allen wrench for them. Work in progress. Still learning how to use this thing. ;-)
(OPTIONAL PARTS I USED)
Note: Generic Non-Affiliate Links
- 3mm Threaded Inserts: https://www.amazon.com/dp/B0CDH36ZMX
- 3mmx20mm: Thumbscrews https://www.amazon.com/dp/B0DQNCKGF9
- PET-CF17: https://www.amazon.com/dp/B0D4PYC3BY
- Digital Angle Level: https://www.amazon.com/dp/B07ZWW3BW5
- XARILK Gen 3 Kinfe Sharpener: https://www.amazon.com/dp/B0D5QQW4YD
- Leather Strop: https://www.amazon.com/dp/B07TWMRC15