1 / 9
House Keys And Cash Storage Capsule For Bicycles 31.8mm Seat Posts — zdjęcie 1
1 / 9

House Keys And Cash Storage Capsule For Bicycles 31.8mm Seat Posts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

House Keys And Cash Storage Capsule For Bicycles 31.8mm Seat Posts

Ocena
0 / 5
Polubienia
33
Pobrania
51
Wydruki
0
Wyświetlenia
437
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

 

The capsule is large enough for a couple of house keys and some cash and is removable for safe keeping when stopped at your favourite coffee shop. 

You will require;

2 M3x18mm socket head cap screws

2 M3 lock nuts 

2 lengths of 3mm thick self adhesive foam cut to 54mmx25mm each for the mounting brackets. (An example product is shown in the photo description)

 

Press on the pre-cut to length and width 3mm thick foam self adhesive pads to the inside of the left and right bracket. Attach the left and right bracket onto the seat post, fasten together with the M3 hardware. Slide the capsule onto the spline of the bracket and lock into place by screwing on either one or two of the lock nuts from underneath. Lastly screw on the cap.

 

I recommend printing in PETG with at least 3 perimeters/walls and 30% infill.

 

No supports are required.

 

Happy printing.

Tagi