Shinobu's Replaceable Blade Collapsing Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version of the sword has removable pommel so the blades can be printed separately and replaced.
- Ocena
- 0 / 5
- Polubienia
- 10
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
The wrap prints with the hilt in this version so they don't need to be glued together like is done with the multi-part version. The hilt prints all at once but the pommel is not glued on but is removable by squeezing its sides. The blades then can be printed separately then inserted or replaced.
The sword works with both my standard katana blade and also Shinobu's custom blade. Just be aware that her blade is very fragile. Make sure you glue the tip on after assembling the blade.
Supports are not required, for best results use a .4mm nozzle. The blades can be printed all at once concentrically or individually in vase mode. I suggest printing in vase mode but if printing concentrically, the test print can be found here. Find detailed instructions on how to print collapsing swords on my website.
Printed on the Prusa XL(aff.) with Polymaker Sparkle Green Pro PLA