1 / 3
LilyGO T-Display-S3 Touch Snap-fit Case (Header Friendly) — zdjęcie 1
1 / 3

LilyGO T-Display-S3 Touch Snap-fit Case (Header Friendly)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable box for the LilyGO T-Display-S3 Touch version with pin header support.

Ocena
0 / 5
Polubienia
4
Pobrania
86
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

Minimalist Snap-fit Case for LilyGO T-Display-S3 Touch (Header Version)

A sleek, functional, and easy-to-print enclosure specifically designed for the LilyGO T-Display-S3 Touch Edition. This version is tailored for boards with pre-soldered pin headers, providing ample internal clearance without adding unnecessary bulk.

Key Features:

  • Zero Support Required: Optimized geometry for clean printing without any support structures.

  • Snap-fit Design: Securely locks the board in place without the need for screws or glue.

  • Pin Header Compatible: Extra vertical clearance to accommodate the header pins, making it perfect for prototyping and breadboard jumpers.

  • Full Access: Precision cutouts for the USB-C port and tactile access to the Boot/Reset buttons.

  • Touch Optimized: The front bezel is designed to protect the screen edges while maintaining full touch sensitivity


⚠ Installation Note (Important):

To ensure a perfect fit and prevent damage to the components, please follow this assembly sequence:

  1. USB-C First: Carefully align and insert the USB Type-C port into its designated cutout first.

  2. Slide & Snap: Once the USB port is seated, gently press the top part of the board into the top retention slot (sliding rail).

  3. Secure: Ensure the board is fully seated under the top lip before snapping the rest of the case together.

Print Settings (Recommended):

  • Material: PETG (Recommended for durability and snap-flexibility) or PLA.

  • Layer Height: 0.2mm.

  • Infill: 15-20%.

  • Wall Loops: 2 or 3 for better structural integrity.

  • Supports: NONE.

Tagi