1 / 7
Adjustable Bike Mirror/ Fahrradspiegel — zdjęcie 1
1 / 7

Adjustable Bike Mirror/ Fahrradspiegel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds a bit more safety to your rides. Easily adjustable through fixable ball joint mechanism. No supports needed.

Ocena
5 / 5
Polubienia
44
Pobrania
72
Wydruki
3
Wyświetlenia
574
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For German description, see below / Deutsche Beschreibung siehe unten.

------------------------------------------------------------------------------------------------------------

CONVEX MIRROR AVAILABLE! | KONVEXER SPIEGEL VERFÜGBAR!

------------------------------------------------------------------------------------------------------------

History | Historie

Date/DatumChangeÄnderung
14.08.25
  • Add convex mirror (bigger and wider field of view)
  • Add convex mirror frame (sturdier)
  • Konvexer Spiegel ergänzt (größer, erhöter Sichtbereich)
  • Rahmen für konvexen Spiegel ergänzt (Rahmen deutlich stabiler)
13.08.25
  • Add 80x55 mm frame
  • Add reverse Clamp for improved toughness
  • 80x55 mm Rahmen ergänzt
  • neue Schelle (Rückseite oben) für erhöhte Stabilität ergänzt
12.08.25
  • model created
  • Modell erstellt

Bike Mirror Mount [ENGLISH]

Description

This is a 3D printable bike mirror mount, designed to be fixed onto the handlebar using a clamp mechanism. The mirror angle can be adjusted and securely fixed via a lockable ball joint, giving you flexibility while ensuring stability during rides.

Designed for mounting below the handlebar on the left side, but it can also be installed above the handlebar by mirroring the arm part before printing.

The clamp must match your handlebar diameter – please select the appropriate model variant. If a specific diameter is missing, feel free to request it – I’ll be happy to generate and upload it.

There are normal and reverse mount clamps. While the normal mount (the ones the fotos) looks better it might not tighten full. The reverse mount fixes the stability issue but is not the most appealing one. It's your choice. :)

Altough flat and convex mirrors are supported, I highly suggest to use the convex mirror over the flat one. The field of view is much better, it is easier to adjust and also bigger. Additionally the frame for this mirror is reworked to hold it in place tightly.

You will need (hardware)

If you need a model for a different mirror size, feel free to ask – I’ll provide a matching version.

Print settings

  • Material: PETG recommended
  • Layer height: 0.2 mm
  • Nozzle: 0.4 mm

The ball joint mechanism also works with larger nozzle diameters and layer heights, though it may feel slightly stiffer to adjust.

Assembly Instructions

  1. Place the mirror into the mirror cover.
  2. Snap the back cover into place.
  3. Slide the M4 screw over the ball joint.
  4. Press the ball joint into the socket and gently tighten the screw, allowing the joint to remain movable.
  5. Attach the arm with the clamp to your handlebar using the M4 screw and nut, in a suitable position.
  6. Adjust the mirror to your preferred angle and fully tighten the ball joint screw to fix it in place.

Fahrradspiegel [DEUTSCH]

Beschreibung

Dies ist eine 3D-druckbare Halterung für einen Fahrradspiegel, die mittels einer Schelle am Lenker befestigt wird. Der Spiegel lässt sich über ein feststellbares Kugelgelenk flexibel einstellen und sicher fixieren.

Standardmäßig für die Montage unter dem Lenker auf der linken Seite gedacht, kann aber durch Spiegeln des Arms auch oberhalb des Lenkers montiert werden.

Die Schelle muss zum Durchmesser deines Lenkers passen – bitte das entsprechende Modell auswählen. Sollte ein bestimmter Durchmesser fehlen, stelle ich diesen gern zur Verfügung und lade ihn hoch.

Es sind zwei Varianten der Schellen verfügbar: normal und verkehrt herum. Erstere ist ansprechender, aber könnte im zweifel Arm oder Lenker nicht foll greifen. Die gedrehte variante (Reverse Mount) hält alles stabil, allerdings ist diese nicht ganz so ansprechend. Entscheide selbst. :) 

Obwohl flacher und konvexer Spiegel unterstützt werden, empfehle ich dringend den konvexen Spiegel zu verwenden. Man sieht deutlich mehr, er ist leichter einzustellen und generell größer. Zusätzlich ist der überarbeitete Rahmen deutlich stabiler!

Zusätzlich benötigt werden (Hardware)

Solltest du einen Spiegel mit anderen Abmessungen verwenden wollen, melde dich gern – ich stelle dir dann ein passendes Modell zur Verfügung.

Druckeinstellungen

  • Material: PETG empfohlen
  • Schichthöhe: 0,2 mm
  • Düsengröße: 0,4 mm

Das Kugelgelenk funktioniert auch mit größeren Düsendurchmessern und Schichthöhen, ist dann aber ggf. etwas schwerer verstellbar.

Montageanleitung

  1. Spiegel in das Spiegelcover einsetzen.
  2. Rückseite einklicken.
  3. M4-Schraube über das Kugelgelenk stülpen.
  4. Kugelgelenk in die Halterung eindrücken und Schraube leicht anziehen, sodass das Gelenk noch beweglich bleibt.
  5. Arm mit der Schelle und der M4-Schraube in geeigneter Position am Lenker befestigen.
  6. Spiegel in die gewünschte Position bringen und Kugelgelenk festziehen.