1 / 5
LDO Gates 16T Idler Frame for Prusa MK3 Y Axis Adjustable Belt Tensioner — zdjęcie 1
1 / 5

LDO Gates 16T Idler Frame for Prusa MK3 Y Axis Adjustable Belt Tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of MattyVee's 16T idler base to accommodate a larger and more robust idler. In his version, you have…

Ocena
0 / 5
Polubienia
4
Pobrania
33
Wydruki
1
Wyświetlenia
561
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a remix of MattyVee's 16T idler base to accommodate a larger and more robust idler.

In his version, you have to use an idler no more than 8mm wide. This version will allow you to use a 10mm wide idler (6mm belt), up to 15mm tall.

I sourced my idlers from Printed Solid: https://www.printedsolid.com/products/ldo-2gt-16t-idler-with-3mm-bore

As you can see in my last pic, the LDO idler is much more robust than the idler called for in the original design.

NOTE: I've included the arm with this as well so you can download both at once. If you need instructions on usage, please visit the original that this based off of.

Category: 3D Printer Parts

Tagi