Raspberry Pi Double Headless PoE W/ 40x10mm fans Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Haz1 case. It snaps together and allows access to the microSD card for quick swaps. This is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a remix of the Haz1 case. It snaps together and allows access to the microSD card for quick swaps. This is designed to run headless, and such i didnt need access to the raspberry pi Ports. This is controlled and powered by 1 Ethernet cable each. Its a really slick device to have next to a PoE switch.
Materials:
2x Raspberry Pi 4b
2x Noctua 40x10mm 5v 3 wire, just snip off the yellow wire and insert the red into 5v, and black into ground
2x PoE Texas Hat. This is a great PoE hat and i haven't had any problems with it.
Also there is a bug in the model that makes it not sit completely flat. It's not all that noticeable but maybe hold off until version 2 if you like perfection.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15
Filament: Prusament PLA Galaxy purple
Category: Computer