Home Assistant Yellow 10 inch rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the Home Assistant Yellow board in your 10 inch rack.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 844
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adaptation of the original Home Assistant Yellow Enclosure to be mounted in a 10 inch rack. The model is split in two, so that the front can be printed face down for a nice texture, without getting a tall and difficult to print model. The parts are fixed together by two or four M3 bolts and threaded inserts. The board is not attached with bolts, but clamped between the two printed parts. I found that the board fits nicely into the front plate, but it had some clearance at the back of the tray, so I added some foam pads (see photo) to make a snug fit. To add the logo, take the .svg file from the home-assistant/assets GitHub repository and used it as modifier in PrusaSlicer on the first layer.
Required additional parts:
- 2x threaded insert M3
- 2x M3 bolt (10-14mm)
- foam pad sticker
There are additional bodies in the .3mf front plate file that can be used as modifiers in the slicer to get extra perimeters around the threaded inserts.
Initially I used two bolts on either side of the tray, but one should also be enough. Both versions are available.
If you print it, I would love to see a make!