TZB MMU2S Filament Buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRUSA MMU2S TZB Filament Buffer Solution
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 1974
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Shout out to TNDave for the basic idea, this is re-designed with my own touches and the ability to use my favourite fitting, the M10 passthrough.
This is for use with PRUSA i3 MK3S:MMU2S printers.
Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... "https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases"
If you also don't like the MMU2S Extruder Tower idea then maybe check out my alternate solution. "https://www.thingiverse.com/thing:3847587"
AMF file with correct orientation attached for easy layout and slicing.
These print beds are required to assemble a full set for the MMU2S file channels.
5 x Case AMF bed layout
1 x Paddle AMF bed layout
1 x Base AMF bed layout
Required Hardware.
1 x 1m M3 Threaded Rod
14 x M3 Nuts
5 x 22x7mm Bearings
Acrylic sheet cut into the following sizes.
2 x 128.5mm x 335mm
6 x 120mm x 350mm
Here is an animation to help visualise how it all fits together.
"https://youtu.be/XO-66k3huAQ"
Print Settings
Printer brand: Prusa
Printer: MMU2s
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20% Gyroid