pride croc charms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor pride flag croc charm prints
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
4 strip flag: ace, nb
5 strip flag: trans, aro
6 strip flags: rainbow
Print settings:
These are step files, each modle consistes if several parts and you can chage the collor of them in a slicer like bambu studio. you can print them in 2 orintations, on its face or on its side. If you print on the side there is a greater change of failure, but color switching is minimilized and you dont really even need a multi color printer, you can use somthing like the pause feature. I would use this orintation if you want to do a print where you have more colors you want tto use then your printer can handle. This orentation also is much stronger. The face down orentaion is is pretty strait forward and rarly fails, but requires a few more fillment swaps and is weaker, it can sometimes break if you take it on and off the shoe a lot. Id also recomend an interlocking print setting if you fillment is opeac enough so it dosnt break at the seems between colors. For both modles I'd recomend tree suports
if you want a specific flag you can use the f360 files linked or leave a comment with a request :3