1 / 2
the sleeve for the Soviet juicer " Струмок " — zdjęcie 1
1 / 2

the sleeve for the Soviet juicer " Струмок "

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The model is required for use in the "струмок 2" juicer.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

Еhe model has been tested in practice. Print from petg layer 0.08mm, 100% filling. The thread is perfectly sized. It may be necessary to chamfer the part to make it easier to remove. Print with 100% petg plastic, with a layer of 0.08 or less for better thread quality and greater durability