Turntable Hinge for Crosley C6B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The replacement hinges for Crosley C6B turntable (two M3x35 bolts needed)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
As my first turntable I chose the Crosley C6B-WH because it had a reasonable price and had all of the features I needed. The only thing was the hinges, they broke on the first day. I don't know who designed those hinges, but they basically unusable. I did asked the store I bought it from if the warranty covers such a case, they said that I can't return it with broken hinges. That's why I decided to design the better alternative to the original hinges.
Hope it helps somebody.
Print instructions
I printed with PETG, haven't tested other filaments. I used a bit of supports for vertical holes in the Bottom Part. Also a bit of support is needed for the Top Part's middle bit.
I used 0.2mm layer height, 20% Gyroid infill, 3 wall loops, 4 top shell layers and 4 bottom shell layers.
Other materials
I thought about the print in place solution, but I think the bolt solution is a better one.
You need to use 2pcs of M3x35mm bolts and 2 nuts for them.
Also I used the original black screws to screw the new hinges to the turntable back.