1 / 3
CatNoir Ring out of "Miraculous LadyBug" Series — zdjęcie 1
1 / 3

CatNoir Ring out of "Miraculous LadyBug" Series

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,15 € – 1,40 € netto (bez VAT)

Dla pliku: catnoir_ring_015mm_pla_mk25smmu2s.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,27 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
1,56 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

An easy print design of the ring of the character CatNoir out of the series "Miraculous LadyBug".

Ocena
4,667 / 5
Polubienia
74
Pobrania
771
Wydruki
5
Wyświetlenia
3603
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

An easy print design of the ring of the character CatNoir out of the series "Miraculous LadyBug". Provided Gcode was printed on a Prusa MK2.5S MMU2.0S. Worked out nice and should fit children from 5 upwards. Is also a good test-object for the MMU upgrade, since print time is just over an hour.

Print instructions

Just load into SlicrPE as MMU print, select the extruders to use and print using support on buildplate only. Printed with standard settings, worked out nice.

Pre-sliced g-code uses Black on extruder 1 and yellow on extruder 2, settings are for Prusament PLA.

Tagi