Ulanzi TC001 Pixel Clock AWTRIX Device Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Ulanzi TC001 Pixel Clock
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Give your Ulanzi Pixel Clock a Makeover!
Ulanzi Smart Pixel Clock TC001
The stock white Ulanzi TC001 with its thin bezel is… well… a little plain. This 3D printable case adds color and a refined style!
Just print the case and buttons, pop your Pixel Clock in, slide the buttons into place — and boom — instant upgrade for your new Desk Clock. Sleek, colorful, and way more fun than stock.
Then convert your Ulanzi Clock into a custom pixel smart display with deep Home Assistant integration via an upgrade to the AWTRIX 3 firmware. Check out my guide.
Don't forget to post your make! =)
From This:
To This:
Instructions:
Step 1: Print the case in one color
- It's a simple shape so your standard settings should work just fine. I printed mine at .2 layer height
Step 2: Print the buttons in complementing color
- Print these slow for best results
Step 3: Punch out the temporary buttons
Step 4: Remove the rubber feet from your Ulanzi Clock
Step 5: Add those rubber feet to your newly printed case
Step 6: Insert your Ulanzi Clock.
Step 7: Insert your printed buttons
Step 8: Voilà, Instant Upgrade!
Step 9: Check out my guide how to update firmware and connect to Home Assistant
Happy Building!