1 / 3
Wall Mount for Samsung Galaxy Tab S10 Ultra 14.6" — zdjęcie 1
1 / 3

Wall Mount for Samsung Galaxy Tab S10 Ultra 14.6"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slim-profile wall for the Samsung Galaxy Tab S10 Ultra 14.6".

Ocena
0 / 5
Polubienia
8
Pobrania
164
Wydruki
1
Wyświetlenia
1123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A slim-profile wall mount for the Samsung Galaxy Tab S10 Ultra 14.6" to allow it to be used as a Home Assistant dashboard.

Due to the large footprint of the device, the print had to be separated into two parts.  You will have a visible gap between the two parts on the final assembly.

This is designed to be printed on the Prusa Core One.  Unfortunately, the print is too deep to fit on the MK4S.

Thank you very much to @RonanWarrior for providing the Fusion 360 file.  Without it, I would not have been able to create this print.

As with the original model, I would not recommend ironing as it caused adverse effects on the bezel edges. 

The model was printed on the Prusa Core One, with 15% Gyroid Infill on the Satin print sheet.  I used Polymaker Panchroma Matte Charcoal black, printed at 195 °C.  No supports or brims were required.

To assemble, wall mount Part A with the power and volume buttons in place.  Connect the power cable to the device and slide the device into Part A.  Finish the assembly by sliding Part B into place over the device and clipping it to Part A.

UPDATE - August 18, 2025

I was having trouble sourcing a flat cable that would provide power negotiation.  I settled on this cable here.  As a result, I had to modify the USB extrusion for Part B and have uploaded an additional version.  This cable makes the central access hole in part A obsolete (although I left it in the design).  If you are using this mount and the linked cable, it would be best to align the hole in your wall with the USB access in Part B, somewhere close to the edge of the mount.

Tagi